This customizable document, Fire Alarm Pull Station Test, is taken from MCN Healthcare’s Life Safety and Interim Life Safety Management Manual. For more than 20 years, MCN has been the health care industry’s leading provider of policy and procedure templates, forms, competencies and other compliance tools.

MCN’s templates save you time, money and resources, rather than developing healthcare policy and procedure manuals from scratch.

Here is some sample content from Fire Alarm Pull Station Test:

	POLICY: One fire alarm pull station per zone shall be tested per quarter and each will be tested annually. This test is to assure proper operation of all signaling devices related to the pull station and fire prevention equipment. PROCEDURE: Check physical condition of station and glass. Repair or replace glass bar as required. Vacuum or clean with contact cleaner. During the test, do not break glass. Remove cover using Allen wrench, which has the same effect. Check to ensure alarm is activated. Ensure annunciator panel is activated. Ensure fire doors close and latch. SUBJECT: FIRE...
Second excerpt:
	...cover using Allen wrench, which has the same effect. Check to ensure alarm is activated. Ensure annunciator panel is activated. Ensure fire doors close and latch. SUBJECT: FIRE ALARM PULL STATION TEST REFERENCE #1027 PAGE: 1 DEPARTMENT: ENGINEERING OF: 1 EFFECTIVE: APPROVED BY: REVISED: Life...